1300 724 622 24/7 Support Center
Menu
Picture of Charging station, Schneider Charge, 1P+N/3P+N, 1xT2S, 7.4/11/22kW, 16/32A
SKU:

EVH5A22N2S

Charging station, Schneider Charge, 1P+N/3P+N, 1xT2S, 7.4/11/22kW, 16/32A

$1,265.72
Available for Shipping : 15-Dec-2024
Product Selector
Charging station, Schneider Charge, 1P+N/3P+N, 1xT2S, 7.4/11/22kW, 16/32A
  • Competitive and certified offer
  • Easy commissioning
  • Benefit of Schneider’s reputation network of certified partners
  • Product available from Distributors
  • Part of Wiser ecosystem for complete home automation
  • Possibility to connect it to a third party cloud
Be the first to review this product
Manufacturer: Schneider Electric
System user guide
Instruction sheet
Product environmental
End of life manual
Image of product in real life situation
User guide
Catalogue
Image of product in real life situation
Declaration of conformity
Product Page Link
Product Data Sheet
This Schneider Charge product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -30°C and 45°C. The output type is a T2S socket-outlet, fixed on the front face of the station. The nominal output power is 22kW. It is supplied in single-phase (1P+N) or three phases (3P+N). The rated charging currents are 16A/32A under 230VAC/400VAC at 50Hz/60Hz. It can be used with a TN-S, TT or IT earthing system. The charging station is easy to install (no special tools required). It is recommended for private use at home, installed in the garage or on a wall externally. The dimensions are (W) 244mm x (H) 352mm x (D) 117mm. Its product weight is 3.2kg. Its color is white (RAL 9003) and green. It is fitted with a built-in protection against residual direct current (RDC-DD as Residual Direct Current Detecting Device). There is no access control to use the charging station for loading an electrical vehicle. One LED is changing color between red, green and blue in order to indicate the loading status directly on the charging station. This one allows to adjust in real time the maximum power allocated to the charging electric vehicle, according to the consumption of the rest of loads in the house and adapt the load according to Off Peak/Peak hours sent by TIC. The charging station is connected with Wiser by the Schneider ElectricTM mobile application for residential energy management. It easily starts, monitors, and controls the charging experience remotely. The OCPP 1.6 communication protocol can be used to connect to the supervision device/third party cloud. It can also be connected to Internet home router, either through Wi-Fi or RJ45 Ethernet cable.

Related products

Picture of Load-shedder, Schneider Charge, 1P, maximum current allowed to charging station manually set from 32A to 100A

Load-shedder, Schneider Charge, 1P, maximum current allowed to charging station manually set from 32A to 100A

EVA2HPC1
$311.14
View Detail

About us

PO BOX 4691, Toowoomba,QLD,4350
7.00am - 5.00pm AEST
Monday to Friday
1300 724 622

Location

Quick Links

Categories

Other Links

Copyright © 2024 Switchboard in a Box. All rights reserved.
Powered by nopCommerce